There are lots of power equipment faults and most of them would give off heat. In the power industry, the electrical thermal imaging camera has been used for thermal defects detection on electrical equipment and lines to ensure their security operation for a long time.
Use our thermal imaging for electrical inspection equipment to do the following power equipment state inspection and fault diagnosis.
Infrared Electrical Inspection of Different Objects
1. Detection Object: Transformer
Faults Can Be Detected: Transformer tank overheating, eddy current overheating, a poor connection of the up and low end of high-low pressure bushing, oil-filled bushing lack of oil.
Infrared Electrical Inspection of Transformer
2. Detection Object: Lightning Arrester
Faults Can Be Detected: Inner damp of various lighting arrester. Inner component aging and nonlinear characteristics variation.
Infrared Electrical Inspection of Lightning Arrester
3. Detection Object: Capacitor
Faults Can Be Detected: Overheating of various capacitor, poor oil-insulation of coupling capacitor and lack of oil.
Infrared Electrical Testing of Capacitor
4. Detection Object: Circuit Breaker
Faults Can Be Detected: diversion body overheating caused by poor connection, inner damp of insulation porcelain jacket, poor connection of moving and fixed contact, lack of oil, poor connection of middle contact and fixed state base.
Thermographic Imaging Electrical Inspections
5. Detection Object: Insulation Chain
Faults Can Be Detected: Bad porcelain, dirt, low value and zero value which leads to insulator fault.
Thermal Imaging Camera Electrical Application
6. Detection Object: Instrument Transformer
Faults Can Be Detected: Insulation fault, oil and iron core fault, inner connecting fault and lack of oil.
Infrared Inspection Of Electrical Equipment
7. Detection Object: Electric Generator
Faults Can Be Detected: stator-core insulation defect, poor connection between stator bar contact, electric brush and collecting ring.
Thermography Electrical Inspection
8. Detection Object: Power cables and wires
Faults Can Be Detected: Diversion overheating fault caused by poor connection of three-phase outlet connector of cable head, diversion overheating fault caused by poor connection of internal connector, partial insulation fault of cable head, cable bushing fault, which lead to wire faults and poor quality of wire, wire insulation faults.
Thermal Imaging Camera For Electrical Inspections
9. Detection Object: Disconnecting Switch
Faults Can Be Detected: Porcelain pole surface dirt and cracks, insulating coating degradation and poor insulation contact.
Thermal Imaging Electrical Inspections of Disconnecting Switch
10. Detection Object: High-voltage transmission conductor and pressure pipe
Faults Can Be Detected: Poor joint contact.
If you want to know more about thermal imaging camera electrical application, please visit our website.
As one of ir camera suppliers, we will do our best to meet all the needs of customers.
As a professional and reliable infrared camera manufacturer, Ulirvision supplies the following category products, varying from infrared thermal imaging camera to infrared lens. ULIRVISION develops innovative technology to make our products more efficient. Ulirvision is striving to create a more human-friendly and sustainable environment for our users through our creative solutions.
You must be logged in to post a comment.