Damp proofing, as the name implies, ensures that moisture does not penetrate the walls. It is very interesting when the moisture from the ground rises to the walls, brick by brick, and will not stand until all the connected walls are wet.
This movement (also known as capillary action) can be horizontal or vertical. We want to make sure that moisture does not rise on the walls, and we need to let it not reach, even the first brick of the wall.
The process of placing a DPC (Damp Proof Course) on the foundation of a house is very important.
Broadly speaking, people do not see how the DPC is set up, in terms of its purpose, and like other houses in the market, they go up and place the DPC.
They are limited to installed PCs and do not achieve the real purpose and profit of the DPC and also waste their money.
Today, we are working with you to mount the DPC in this field of Modern edge Engineering and Construction Company. Here's how to put one together for use with your DPC, so you can get the most out of it.
I am an Engineer, and you are reading an article, the main purpose and how to put a DPC in the foundation.
The real purpose of the DPC:
The main purpose of a house-based DPC is to prevent moisture from moving from the floor to the walls as the soil has the ability to absorb water and move it forward and bricks are also made of clay.
Moisture from the soil touches the foundation bricks, then spreads from one brick to another, reaching the walls, and undermining the beauty of the house.
The main purpose of this is for the DPC to be incomplete. Now let's talk about how to install DPC.
How to install DPC:
Complete the construction of the foundation of the house to the required height, and remember that where there is a "4.5-inch wall above the foundations, the top of the foundation should also be 4.5 inches".
Otherwise, there may be a problem.
Then check the base level. If there is a problem at this level, fix it.
After that, start the DPC process. It is best to install the DPC in a concrete ratio of 1: 2: 3 or 1: 3: 4, watering the foundations well so that the bricks are well moistened.
Then talk to meson about pouring concrete with the help of a small hand tool with a handle and a flat metal; used to pick up or spread concrete.
The height of the shuttering used, should be at least 2 inches, if more than that it is better and remember that the DPC should be level and on the day the DPC is emptied, never start construction work on it, On the same day.
Do not use plastic or tile over the DPC before the stone is built, otherwise the DPC and the wall construction will not be put together and if the beam is to be laid, never place the rod on the foundation.
Courtesy,
Modern Edge Engineering & Construction Company provides all the services in Khyber Pakhtunkhwa and Islamabad, which includes all types of construction, building design, architecture, interior design and finishing etc.
If you also want to make a map of your home, office or market, interior design or construction, visit the office today for information or contact phone numbers.
And get all the services up to home construction and finishing.
Helpline: +92 336 1510539
Email: [email protected]
Please be sure to encourage us by sharing this article.
You must be logged in to post a comment.