How to open a lock without a key. Without breaking the lock!
Here are some effective ways to open it easily without breaking any locks! There are other ways too you can see them, too; they are more effective than locks! However, you can unlock the locks of the previous model by following the steps below! As a result, they will be reusable!
Process 1
This process will require a safety pin, which we use in our daily work in different cases.
First of all, that part of the head of the safety pin and the narrow part where the pin is attached should be cut off.
The head of the safety pin should be cut off, as shown in the figure below.
This time the narrow parts of this pin have to be inserted through the two ends of the lock hole.
Just like in this picture
Now insert the key into the lock keyhole with the sharp part of the knife or the head of the electric tester and turn the key to open it.
Process 2
In this process, there is another way to open the old lock without destroying it! In many cases, the hole in the top of the lock through which the top of the lock is inserted, and the lock is opened is hammered from the outside or
If you hit with the rod, the lock is opened! However, it is better to hit the top of the lock a few times before! Below is a picture analysis of this process.
Procedure 3:
Many of the locks we use have nets, so the nuts can be unlocked by loosening the nuts by rubbing the net with something or rubbing with a napkin.
For this, first, you have to find out the part of the net by understanding the difference of color by cutting a little intellect Daralo can rub with anything! Then you will get Like the image above.
Once you get it, rub it with gauze and separate the completely burnt part.
After separating the net, you will get such parts Where a few hats with screw glue.
Try to open those hats with a sharp knife, Or you can take the help of a hard needle.
After separating the hats in this way, you will see the nuts. Then open those nuts A little hard work!
When the nuts are open, insert a light plate into the keyhole with a razor blade or something narrow to open it. I hope it will open.
Process 4:
Breaking the lock, without any sound and standing weapon! This will require a solid new blade 7, Then stick it to a solid structure (so that it doesn't move) and start cutting by specifying a place in the part of the lock that is attached (see figure below). Make sure that the place does not move In the same place, as if after the blades. In this way, it is possible to cut the lock in 10 minutes. Please take a look at the pictures below; I hope you understand.
.
You must be logged in to post a comment.