The price of a love doll is generally over 10,000 yuan. I don't know who will cry if the real doll breaks due to mismanagement. High-simulation love stones are all high-end works and collectible items. Therefore, after purchase, it is necessary to store it carefully, so today we will inform you about the correct management method for high-simulation love stones.
How to deal with high-simulation Aiwa skin wrinkles: High-simulation Aiwa skin is made of advanced non-toxic and odorless silicone for material properties. If the doll's joints are kept bent for a long time, the skin of the bent joints will show some wrinkles.
Then what is the correct way to handle these wrinkles? First, the joints are restored to their original position so that the joints are not bent and the skin is not twisted. Although silica gel is elastic, it can be restored after a certain period. After maintaining the doll's shape, take a break for skin recovery.
How to avoid dyeing a high simulation ラブドール: So this problem is a very good solution. Of course, sometimes you have to take pictures. It is recommended to put white silk, socks, hand socks, etc. inside the real doll so that the clothes will not be stained with the real doll in a short time. After dyeing, we recommend washing the dirty parts.
How to deal with high-reproduction love doll oil stains: Silicone material is mixed with silicone oil. Wipe the surface with a clean, lint-free towel, and do not use excessive force.
What should I do if the real doll's skin gets dirty or dusty during use or long-term installation?
At this time, it is not enough just to wipe with a clean towel. It should be washed with lukewarm and cold water, and for stains that cannot be washed with water, use soap, shampoo, shower gel, or other mild detergent. Do not use corrosive detergents such as strong acids, strong alkaline solutions, river disinfectants, and detergents. After drying the water completely with a clean towel after washing, lightly apply Tjimjilgarna talc powder and apply the powder evenly to make the real doll's skin smooth again.
1. Prohibited matters
(1) Prohibit prolonged placement of difficult poses: When the doll leaves the factory, it is in a straight position. Prolonged placement of difficult poses can cause deformation and damage to the adhesive material. After use, be sure to restore the doll to its original state, that is, let it lie flat and hang its hands on both sides of the body (not a standing doll, do not let the doll stand for a long time);
(2) It is prohibited to use sharp tools to scratch the surface of the skin and rub it vigorously to avoid damaging the skin;
(3) It is prohibited to leave the doll in direct sunlight for a long time to avoid deterioration of the adhesive material;
(4) Try not to wear easily faded clothing or accessories.
2. How to maintain when problems arise
(1) What if it gets dirty?
Step 1: Cold/warm water, use laundry detergent, shower gel, or specialized doll cleaning agents for cleaning. Alcohol cleaning or boiling water scalding (which can damage the coating) is strictly prohibited;
Step 2: Wait for air drying after washing. Towels and tissues can be used to dry the water, and the use of a hair dryer is prohibited;
Step 3: Apply the delivered texture powder (which can be replaced by ordinary prickly heat powder) onto the surface.
(2) What should I do if there is a crack?
Determine the size of the crack. Small cracks can be repaired by oneself, while larger cracks are recommended to contact the seller or manufacturer. The steps for repairing small cracks are as follows:
Step 1: Clean the damaged surface and let it dry;
Step 2: Restore the adhesive at the wound to its original position, and then evenly apply a layer of repair agent (glue);
Step 3: Let it stand still for more than 30 minutes, wait for it to dry and solidify.
The principle of a repair agent (glue) is to melt the adhesive around the damaged area (harmless to the human body) during the repair process, and then allow the damaged area to fuse again. Normal operation will not affect the appearance after repair, but if the ruptured wound is not closed and the repair agent is applied, it should be wiped off with a damp cloth or tissue, restored to its original position, and then repaired. Otherwise, continuing to apply the repair agent without wiping it off will cause the gel around the crack to melt more severely.
(3) What if I dye it?
The decolorization cream for TPE thermoplastic elastomer staining can remove local staining within a period (non-toxic, harmless to the human body).
Step 1: Based on the size and degree of staining, use a cotton swab to take an appropriate amount of ointment and evenly apply it to the staining area;
Step 2: Repeat wiping every 4 hours until completely removed.
However, it should be emphasized that the depigmentation cream can only slow down the staining to varying degrees. In other words, using depigmentation cream with heavy staining can make the color lighter, but it cannot be completely removed. In general, small-scale staining will complete fading within 24 hours, while severe staining will generally be removed within 3-4 days.
You must be logged in to post a comment.