Want to save some money? Ever wondered if you could install automatic stereo? Yes, you can! Go ahead, spend that money on your hardware! Don't spend it on hard work. Also, installing an automatic stereo can be a very rewarding experience, needless to say, you can learn a lot from it too. Nothing beats the feeling of seeing your "creation" in action, running smoothly and completely.
But be very careful, you don't really want to damage your expensive hardware. Well, most cars don't have the brains to install audio hardware, you know that most parts have shapes, especially sockets and slots, etc., and they will only fit where it needs to be installed. ۔ Still, it is better to proceed with the procedure.
In-car stereo installation, you have to decide what kind of rig you are going to put in your car. If you are a beginner, it is best to install a car stereo if it is just a simple system. You want to leave the complexities to professionals, installing delicate devices such as LCD panels, motorized parts, etc. Especially if it requires making custom panels etc.
Head units are the easiest task in-car stereo installation. Fortunately, most units follow the same size standards (DIN). In many cars, after removing the factory radio, the aftermarket radio will fit in the hole. In many other cars, a cut is required if the factory hole is too large, or not deep enough. In some cases, the dash has to be cut. Kits are required for installation in any car stereo store.
There are two types of car stereo installation. ISO mounting occurs when the radio can be damaged in existing factory radio brackets, as in most Japanese cars. Ring mounting occurs when the aftermarket radio comes with a metal ring that is fitted to the factory radio hole or aftermarket kit with bendable tabs. In many cars, dash and trim rings have to be filed to enlarge the radio hole. Once the ring is installed, the radio slips in and is caught by Snap. In most cases, special tools are needed to remove the radio
Speakers are very important in car stereo installation. It doesn't matter how expensive
your speakers are, if they are not installed properly, the sound will not be equal.
In a simple car stereo installation, you may be using speakers that fit the factory location. Just make sure there are no gaps or holes. Sometimes rotating wood or fiberglass can help reduce holes and give you a much better sound. But always be careful when using power tools around the speaker. Car stereo installation warranties generally do not cover holes in the speaker.
For non-conventional speaker locations, metal sometimes has to be cut. You may want to leave it to the professionals, who need tools like plasma cutters and pneumatic drills. But if you are going to insist, a pair of metal pieces (left and right cut) will do.
Car stereo installation has to be placed in its environment along with other sources of vibration and noise. Although it is impossible to eliminate them completely, there are products that will greatly reduce noise and annoyance, especially on non-luxury cars. Liners, sprays and adhesive strips, and even carpets on panels can make a difference
You must be logged in to post a comment.