To finish the BCMSN test and procure your CCNP, you must know everything about HSRP! A piece of that is realizing how the MAC address of the virtual switch is inferred, and another part is realizing how to change this location. We'll check out the two components in this instructional exercise.
We have two switches on a portion running HSRP, so first we want to discover what the MAC address of the HSRP virtual switch is. The show order for HSRP is show backup, and it's the principal order you should run while arranging and investigating HSRP. We should run it on the two switches and analyze results.
R2#show backup
Ethernet0 – Group 5
Neighborhood state is Standby, need 100
Hellotime 3 sec, holdtime 10 sec
Next hi sent in 0.776
Virtual IP address is 172.12.23.10 designed
Dynamic switch is 172.12.23.3, need 100 lapses in 9.568
Backup switch is nearby
1 state changes, last state change 00:00:22
R3#show reserve
Ethernet0 – Group 5
Nearby state is Active, need 100
Hellotime 3 sec, holdtime 10 sec
Next hi sent in 2.592
Virtual IP address is 172.12.23.10 arranged
Dynamic switch is nearby
Reserve switch is 172.12.23.2 lapses in 8.020
Virtual macintosh address is 0000.0c07.ac05
2 state changes, last state change 00:02:08
R3 is in Active state, while R2 is in Standby. The hosts are utilizing the 172.12.123.10 location as their entryway, however R3 is really taking care of the responsibility. R2 will dominate if R3 becomes inaccessible.
An IP address was statically appointed to the virtual switch, however not a MAC address. Nonetheless, there is a MAC address under the show backup yield on R3, the dynamic switch. How did the HSRP interaction show up at a MAC of 00-00-0c-07-ac-05?
All things considered, the majority of the work is now done before the arrangement is even started. The MAC address 00-00-0c-07-ac-xx is held for HSRP, and xx is the gathering number in hexadecimal. That is a decent expertise to have for the test, so ensure you're alright with hex transformations. The gathering number is 5, which is communicated as 05 with a no-account hex person. On the off chance that the gathering number had been 17, we'd see 11 toward the finish of the MAC address – one unit of 16, one unit of 1.
On uncommon events, you might need to change the MAC address doled out to the virtual switch. This is finished with the reserve macintosh address order. Simply ensure you're not copying a MAC address that is as of now on your organization!
R2(config-if)#standby 5 macintosh address 0000.1111.2222
1d12h: %STANDBY-6-STATECHANGE: Ethernet0 Group 5 state Active - > Learn
R2#show reserve
Ethernet0 – Group 5
Nearby state is Active, need 150, may appropriate
Hellotime 4 sec, holdtime 12 sec
Next hi sent in 3.476
Virtual IP address is 172.12.23.10 designed
Dynamic switch is neighborhood
Backup switch is 172.12.23.3 terminates in 10.204
Virtual macintosh address is 0000.1111.2222 designed
4 state changes, last state change 00:00:00
1d12h: %STANDBY-6-STATECHANGE: Ethernet0 Group 5 state Listen - > Active
The MAC address will require a couple of moments to change, and the HSRP switches will go into Learn state for that time-frame.
A certifiable HSRP investigating note: If you see consistent state changes with your HSRP design, do what you ought to consistently do while investigating – really look at the actual layer first. Good luck on your BCMSN test!
You must be logged in to post a comment.