The installation of shower can be a simple task; however, a single error can lead to a serious problem in the future. The result of inferior installation may be water leakage, low pressure, molds and expensive repair. These problems are common among many homeowners since the installation of the shower was not done properly. It is why it is highly relevant to employ professional bathroom plumbers and learn the most frequent mistakes. This guide shows the most unusual errors in the installation of the shower and how to prevent those faults in order to have an easy and prolonged installation.
Misplaced Planning Before Shower Installation
It is one of the largest errors in the very process of the shower installation. Most individuals make the mistake of not planning and taking the process hastily. They fail to measure the space appropriately and pay attention to plumbing connections. This may cause cocked fixtures and inefficient water flows.
When water is being properly planned, it will check on water pressure, drainage position, and the support of the wall. The kind of shower system you want should also be determined, like the overhead showers, handheld showers, or mixer showers. When there is proper planning, it will prevent delays and also minimize the possibility of future damage.
Ineffective Waterproofing and Sealing
One of the most significant steps in installing the shower is waterproofing. In a case of bad implementation, water movement is experienced at the back of tiles and walls. In the long run, it results in mould, dampness, and damaged walls.
There are a lot of installers who use low-quality sealants or allow applying them in a wrong manner. There are gaps in the shower trays, doors, and joints that enable the escape of water. In order to prevent this, tiling should be covered with waterproof membranes before the tiling. Sealants of high quality have to be used with care and inspected frequently. The strong waterproofing is always the priority of professional bathroom plumbers.
Incorrect Shower Tray/Base Fitting
The base or shower tray holds all the showering system. And water will not drain properly unless it is level or attached appropriately. The result is standing water, leakages, and floor damage to the lower floor.
Another mistake that can be made is to install the tray without supporting it well under it. Other individuals disregard the instructions of manufacturers. In order to prevent issues, the base has to be laid on a firm surface and made flat. The drain has a low gradient to guarantee water flow.
Unsuitable Drainage System installation
Poorly installed showers have drainage problems which are very common. In case the drain pipe is not properly placed, the water drains slowly or becomes stagnant. This may result in offensive odors and water spillages.
The other error is the use of pipes that are not big enough to carry the water. This puts a strain on the pressure and constant blockages. Seasoned bathroom plumbers also make sure that drainage pipes are of the proper size and that they are connected. They also check the drainage prior to the completion of the installation.
Installation of Low-Quality Plumbing Materials
An attempt to save on the cost by providing low-quality materials is expensive in the long run. Inferior quality pipes, connectors and fittings have very short life span. They tend to leak or crack when under pressure.
Better and quality materials have a longer life and offer good performance. Proper pipes can ensure the water pressure and minimize the chances of further repair. It should always use reliable materials and fittings that comply with safety measures. This will make sure that your shower instalment lasts a long time.
Incorrect Pipe Connections
Hidden leaks can be as a result of poor connection of pipes. Such leaks cannot manifest themselves right away but can affect walls and floors over time. Some common problems are loose joints, over-tight fittings or improper alignment of pipes.
Skill and experience are required in installing properly. There should be proper connecting of pipes without straining. Seals should also be tight but not strained. The right tools and techniques are applied by the bathroom plumbers to facilitate leak free connections.
Ignoring Ventilation Needs
Shower installation does not pay much attention to ventilation. Lack of proper airflow keeps moisture in the bathroom. This provides the ideal ground on which there is mold and mildew.
To eliminate this moisture an effective exhaust fan is installed. It is also used as a way of protecting ceilings, walls and fixtures. With good ventilation, air quality is better and your bathroom will always be fresh and dry.
Conclusion
Installation of showers is a process that needs to be carefully planned, the material used and skilled workmanship. Such misfinishing errors as bad waterproofing, improper drainage installation, and quality fittings may cause severe issues. Given these mistakes and having a good working team of skilled bathroom plumbers, you have the opportunity to have a safe, leak free and durable shower. Even a well-fitted shower enhances comfort besides being able to save your home the expensive cost of water damage.
You must be logged in to post a comment.