Energy bills are one of those monthly expenses that just can’t be escaped. Knowing how to save energy and taking steps to conserve more and waste less will leave extra room in the monthly budget for other things.
Here are some energy conservation and efficiency tips that can result in considerable savings. Some of these energy savers are not practical for renters, but many will help homeowners and apartment dwellers alike.
Tips on Saving Energy
Use the following 10 tips to save on energy and reduce electricity bills:
Perform regular preventive maintenance on appliances.
Use energy-efficient thermostat settings.
Switch out your lightbulbs.
Put a stop to standby power.
Drop the hot water heater temperature.
Be smart about appliance usage.
Stop the flow of heat out of your home.
Plug air leaks.
Upgrade to energy-efficient appliances.
Replace or insulate old windows.
Here are a few ways to implement these tips that will help you see significant savings.
1. Perform Regular Preventive Maintenance on Appliances
The less efficiently an appliance runs, the more energy it is likely to use. This is especially true of home heating and cooling systems. Having an HVAC system inspected and tuned annually, as well as regularly changing filters, can go a long way in keeping it operating efficiently.
Refrigerators and dryers are two more appliances that can cost more to run if they aren’t well maintained. Keep your dryer lint trap clear and have the vent hose cleaned out annually. Refrigerator coils should be cleaned regularly, too, and door gaskets replaced as necessary. Bonus tip: A full fridge and freezer will use less energy to stay cool than minimally-stocked appliances.
2. Use Energy-Efficient Thermostat Settings
According to the U.S. Department of Energy, a homeowner can save 10% annually on heating and cooling a home simply by adjusting the thermostat 7 to 10 degrees Fahrenheit from its typical setting for eight hours a day. The smaller the difference between the indoor and outdoor temperatures, the less energy will be used.
Having a programmable thermostat can make controlling a home’s temperature easier. A thermostat programmed for the optimal settings for different times of the day can help ensure a home’s temperature stays comfortable and energy bills remain reasonable.
3. Switch Out Your Lightbulbs
LEDs use up to 90% less energy than incandescent bulbs and can last up to 25 times longer, according to the U.S. Department of Energy. Replacing incandescent bulbs with LEDs can save the average homeowner up to $225 per year.
To save even more, use those LED bulbs less. Rely on natural light as much as possible during the day and turn lights off any time they aren’t needed.
4. Put a Stop To Standby Power
Energy used by products switched off or in standby mode is known as phantom power or standby power. It accounts for 5% to 10% of residential energy use. These phantom electronics include game systems, TVs, phone chargers and coffee makers. Putting some of these devices on power strips that can easily be turned on and off can save considerable energy.
5. Drop the Hot Water Heater Temperature
Heating water is the third biggest use of energy in most homes. The optimum temperature for hot water heaters is 120 degrees Fahrenheit, both in terms of function and energy efficiency. Those in colder climates might consider using a water heater blanket to ensure the tank is well-insulated.
6. Be Smart About Appliance Usage
Reducing appliance usage is one of the easier ways to save energy. Only wash full loads of clothes and dishes. Dry clothes on a cycle that uses the automatic sensor to detect when to shut off and turn off ceiling fans and lights when leaving any room.
7. Stop the Flow of Heat Out of Your Home
Insulation prevents hot outdoor air from flowing into a cooled home and warm air from flowing out when it is cold outside. So a properly insulated home will stay cooler in the summer and warmer in the winter. Ensuring a
You must be logged in to post a comment.